12V 6A Battery Charger and Maintainer, does Lithium

Features

The 12V 6A Battery Charger and Maintainer (Trickle Charger) is designed to charge AGM, Calcium SMF, EFB, GEL, WET & Lithium (LiFePO4) batteries.
From 3Ah to 120Ah. The charger can also be used to maintain batteries up to 120Ah.
This battery charger and maintainer utilises state of the art patented 9 stage technology for charging various types of 12V batteries.
It can also be used to maintain a wide range of batteries and features a patented repair and rejuvenation mode for lead-acid type batteries which breaks down heavily desulphated cells revitalising the battery increasing battery life and performance.

1A Maintenance mode will charge smaller batteries between 3Ah and 20Ah and will maintain batteries up to 100Ah.
4A Silent charge mode will charge mid-sized batteries between 12Ah and 80Ah and will maintain batteries up to 120Ah.
6A Rapid charge mode will charge batteries between 18Ah and 120Ah and will maintain batteries up to 180Ah. This setting will give you the fastest charge possible.

Battery Charging vs. Battery Maintenance
What's the difference between the two and which battery charger suits your requirements best?
Firstly you need to determine whether you need to recharge a flat battery entirely or just keep a battery at full charge.
Battery charging is when you need to recharge a flat or dead battery to full.
Battery maintenance on the other hand is when you just want to keep a battery topped up.
For instance, if you're storing a classic car that you only drive a few times a month but want to ensure it's ready to go on a sunny afternoon you would require battery maintenance as opposed to battery charging.
This is often referred to as trickle charging a battery. Understanding each charger's limits is important.

Specifications

Owners Manual in PDF [HERE]

Input: 100-240VAC 50/60Hz
Power Consumption (max): 1.4 / 0.75A (95W)
Output: 12V DC - 6A / 4A / 1A
Charge Voltage: 14.1 / 14.4V / 14.7V DC
Float Trickle Voltage: 13.6V DC (Lead-Acid battery Selection only)
Start Voltage: 2V DC
Suitable for: GEL, Calcium SMF, AGM & WET (Inc EFB), Lithium (LifePO4)

Ideal for Charging:
3Ah - 120Ah (900 CCA)
Ideal for Maintaining: 3Ah - 180Ah (1300 CCA)
Input Cord Length: 1.8m with 2 PIN AU AC Wall Plug
Output Cord Length: 1.2m with SAE 2 Pin Connector
Charging Lead Length: 60cm - Integrated Crocodile Clip / Ring Terminal Harness
Dimensions: 182mm x 88mm x 48mm
Weight: 0.75kg
Operating Temperature: -15 to 50° C
Storage Temperature: -25 to 85° C

Contents

What's Included?:
1 x 12v 6a multichemistry Charger
1 x Crocodile Clip w/integrated Ring Terminals Harness
1 x Owner's Manual

Product Enquiry

Contact Details

Request More Information

Details of the product above will be automatically included with your enquiry.

Associated Items